- OUR MACHINES
- Manual Shrink Wrapping Machines
- Semi-Automatic Shrink Wrapping Machines
- Fully Automatic Shrink Wrapping Machines
- Fully Automatic Side Seal Machines
- High Speed Fully Automatic Machines
- Shrink Tunnels
- Bundle (Sleeve Wrapper)
- Mailing Systems
- Carton Sealers / Carton Erectors
- Pallet Wrapping
- Vacuum Machines
- Roller Die Cutters
- Skin Machines
- Flow Wrap Machines
- Form Fill Seal Machines
- High Frequency Sealers
- Verticle Form Fill Sealing Machines
- Filling Machines
- Capping Machines
- Doy Pack Machines
- Over wrapping Machines
- Metal Detector and Check Weigher
- Labelling Machines
- Bagging Systems
- Top Seal Machines
- Seal Stretch Machines
- Blister Machines
- Horizontal Wrapping Systems
- Robotic Systems
- In Feed / Out Feed Conveyors
- PACKAGING FILMS
- Polyethylene
- Polyolefin
- BOPP Film
- Polypropylene
- PVC Films
- Stretch Films
- SECOND HAND MACHINES
- Second Hand Machines
Pallet Wrap: MP Easy Standard
Features Include:
- Built-in battery charger
- length and width max. Load: without limitation
- height max. Load: according to the specifications of the machine
-
height max. film reel used: 500 mm
-
diameter max. film reel: 300 mm
- wrapping cycles without need ‘charging: ca. 250/300, depending on the size of the load and the set work cycle
- transmission trolley, via belt
- photocell for automatic reading of the height of the load to be wrapped
- electromagnetic clutch for adjusting the tension of the film
- microprocessor control panel with push buttons for digital adjustment of parameters and the selection of the optimal work cycle between the following 4 standard available:
* Standard wrapping cycle (up & down)
* wrapping cycle only during the ascent of the reel carriage
* wrapping cycle only during the ascent of the trolley, with a stop for positioning a protective cap on the top of the pallet on 4 sides
* wrapping cycle standard (up & down) with a stop for positioning a protective cap on the top pallet, with four open sides -
diagnostics for faults or alarms
-
selector for manual or automatic wrapping cycle
-
separate programming number of revolutions lower and higher
- inverter for start / soft stop and speed adjustment ‘of rotation
- speed ‘of translation of the film carriage adjustable by inverter
- helm with buttons for manual handling (forward / backward) of the machine
- device front safety / emergency
- indicator (display) of the charge level of the batteries
- possibility ‘of transport of the robot without dis-assembly of the batteries
- opportunity ‘to use the machine in such special working environment (without specific limitations)
- motors with IP54 protection
- standard voltage: 240 volts single phase
- Machine weight (including battery): 350 kg
